JLG X17JPLUS Operator, Safety, And General Maintenance Manual page 68

INSTRUMENTS AND CONTROLS
To enable this position it is necessary to operate on the key selector placed on the
base of the turret and connect the optional second remote control to the machine.
Before proceeding with the connection read carefully paragraph regarding the
use of the optional second remote control ʺMaintenance control position with
remote control from the ground (p. 143)ʺ.
This control position is usable only to carry out controls and maintenance on
the machine. Do not use this position to control the machine during normal
working operations.
It is absolutely forbidden to move the machine from this position if
one ore more operators are in the basket.
66
Fig. 59 Position connector optional second remote
Boom Lift Models X17JPLUS
MUX17JP021602