Checking That All The Plates Are Present On The Machine And Intact - JLG X17JPLUS Operator, Safety, And General Maintenance Manual

MAINTENANCE
For the cartridge check follow the below instructions:
1 Unscrew the cap of the filter and remove the filter cartridge.
2 If it is very dirty, replace it with a new one having the same characteristics.
3 Tighten cap of the filter.
It is very important to replace the cartridge for the first time after 50 opera‐
ting hours, to eliminate hose and hydraulic component processing residues
from the hydraulic system.
12.13.CHECKING THAT ALL THE PLATES ARE PRESENT ON THE MACHI‐
NE AND INTACT
Make sure that the prohibition, warning, danger and control plates positioned on
the machine are all present and visible.
See the paragraph regarding decals ʺSafety warnings (p. 30)ʺ, to identify any mis‐
sing or damaged plates.
164
Fig. 163 Hydraulic oil filter position
Boom Lift Models X17JPLUS
MUX17JP021602