Emergency Operations On The Carriage: Moving The Platform Stabilisers Using The Hand Pump To Allow The Machine To Be Transported - JLG X17JPLUS Operator, Safety, And General Maintenance Manual

USING THE MACHINE
11.5.6.Emergency operations on the carriage: moving the platform stabilisers
using the hand pump to allow the machine to be transported
The hydraulic hand pump can be used to move the stabilisers and set the ma‐
chine in the transport configuration only after closing completely the aerial part
of the platform.
To raise the stabilisers from the ground in order to be able to transport the machi‐
ne, proceed as follows:
Fig. 133 Battery cut‐out
Fig. 134 Machine closed and aligned
126 Boom Lift Models X17JPLUS
MUX17JP021602
1 Place the emergency key
on the electrical compo‐
nents compartment, re‐
moving it from the
machineʹs key holder,
where it is sealed with
lead;
2 Check that the machine
is completely closed and
aligned;