Table of Contents
Advertisement
USING THE MACHINE
both connectors must be closed with the respective sealing plugs to prevent
moisture from entering.
11.7.RECHARGING THE BATTERY
11.7.1.Battery charging Petrol/Diesel engine
The machine is equipped with a charging system of the battery. Using the Petrol/
Diesel engine to a regime of revolutions exceeding 2200rpm the battery is rechar‐
ged by the current generator. There is also the possibility of recharging the bat‐
tery by the power supply.
To do this, proceed as follows:
• Check that the battery cut‐out is connected.
• Power the machine by an electric cable connecting it to the socket on the chas‐
sis near the electric motor and activate the main supply switch in the control ca‐
binet of the motor.
Fig. 141 Main supply socket
• In this condition the battery charger mounted on the machine recharges the
battery.
Recharging battery must be carried out in an ventilated area away
from open flames or sources of ignition. In order not to cause damage
to the battery is appropriate to recharge the same only when the am‐
bient temperature is between 0 and 40 ° C
130
Boom Lift Models X17JPLUS
MUX17JP021602
Fig. 142 Main supply switch
Advertisement
Table of Contents
