Table of Contents
Advertisement
MUX17JP021602
13.3.2.Lifting the machine using ropes or chains
The machine is equipped with 4 eyelets, positioned on the end of the outriggers,
allowing to lift the machine through 4 ropes or chains of suitable length and ca‐
pacity.
The lifting devices must be in good working order and used according to the spe‐
cifications supplied by the manufacturer. As the weight of the platform is not di‐
stributed equally over the four stabilisers, the minimum required capacity for the
four ropes, chains or slings used must not be less than 2000 kg and they must be
minimum 3 m long and all identical. The slings cannot be more than 60 mm wide,
the chains not more than 25 mm, and the rope diameter cannot exceed 25 mm.
The manufacturer of the Platform is not responsible in any way for damages
caused to the machine, lifting device or persons and/or objects due to impro‐
per execution of this operation.
Using ropes, chains or slings shorter than 3 m could cause permanent dama‐
ges to parts of the structure of the machine.
SAFETY STANDARDS FOR TRANSPORT
Fig. 169 Ropes or chains lifting points
Boom Lift Models X17JPLUS
183
Advertisement
Table of Contents
