Stopping The Engine/Motor; Stopping The Motor Lithium Version - JLG X17JPLUS Operator, Safety, And General Maintenance Manual

MUX17JP021602
11.4.4.Stopping the engine/motor
To stop the engine, press again button 11 on the remote control; it allows the en‐
gine to be switched off or on depending on its status.
To stop the electric motor, press button 12; it allows the electric motor to be swi‐
tched off or on depending on its status ʺPush buttons (p. 59)ʺ.
11.4.5.Stopping the motor Lithium version
To switch off the electric motor, release the button or the lever on the remote con‐
trol or release the emergency control key. The motor will stop automatically in 3‐4
seconds.
The electric motor can only be considered stopped if one of the emer‐
gency stop buttons on the machine is pressed.
Whenever a movement of the machine has been completed and work
needs to continue with the machine off, one of the emergency stop
buttons must be pressed and left activated.
The machine must not be left off with the electronic board and the re‐
mote control powered.
Boom Lift Models X17JPLUS
USING THE MACHINE
91