Safety Warnings; Generalities; Noise And Vibration - JLG X17JPLUS Operator, Safety, And General Maintenance Manual

Table of Contents

TECHNICAL INFORMATIONS

7.12.SAFETY WARNINGS

Carefully read all the safety messages provided in this manual and the safety si‐

gns on the machine. Keep the safety signs in good condition and replace them if

they are damaged. Make sure that any new components on the machine are pro‐

vided with the correct safety signs.

7.12.2.Noise and Vibration

The Constructor declares that the platforms have been tested according to the pa‐

rameters of European directive 2000/14 EC, with the guaranteed sound power le‐

vel measurement shown on the machineʹs EC declaration of conformity. When

operating the aerial part of the machine, this value is reduced even further as the

basket moves away from the main source of noise. The vibrations transmitted to

the operator from the controls and directly from the floor of the basket are lower

than the maximum allowed limits 0,5 m/s2.

To avoid accidents, before starting

work and before performing any

maintenance operations, it is neces‐

sary to read, understand and follow

all the precautions and warnings con‐

tained in this manual. The user/opera‐

tor of the machine must decline all

responsibility for operation until ha‐

ving read this manual and fully un‐

derstood how to use the machine

under the supervision of an expert

and qualified operator.

Boom Lift Models X17JPLUS

MUX17JP021602

Table of Contents