INSTRUMENTS AND CONTROLS
MUX17JP021602
Fig. 60 1‐ SkyGuard™ Sensor 2‐ SkyGuard™ Override Switch (button number 8)
TM
SkyGuard
Function Test
TM
From the basket control position, test the SkyGuard
feature by setting up ma‐
chine and operating the telescope out functions and then activating the SkyGuar‐
TM
d
sensor. The telescope out function will stop and the telescope in function will
TM
operate for a short duration and the beeper will sound until the SkyGuard
sen‐
sor are disengaged.
TM
Disengage the SkyGuard
sensor, release control, press and release the emer‐
gency stop on the remote control in the basket, make sure normal operation is
available.
TM
If SkyGuard
remains activated after function reversal or cutout, depress and
TM
hold the SkyGuard
Override n° 8 remote control button to allow normal use of
TM
machine functions until the SkyGuard
sensor is disengaged.
68
Boom Lift Models X17JPLUS