Table of Contents
Advertisement
MUX17JP021602
12.6.INSPECTION AND MAINTENANCE INTERVALS
All aerial platforms must be inspected, tested and serviced according to the fol‐
lowing instructions. See the user and operation manual for the complete list of re‐
commended inspection intervals and the correct checking and servicing
procedures.
12.6.1.A‐ Daily inspections before starting
All the components that have a direct influence on the safe operation of the aerial
platform and whose conditions may change from day to day must be visually in‐
spected by the operator on a daily basis.
The following must be regularly inspected and must also be checked during ope‐
ration and between regular inspection intervals:
1 Level of all fluids, such as fuel, engine oil, coolant and battery fluid.
2 Hydraulic hoses for leaks or loose connections.
3 All quick disconnection hoses for proper connection.
4 Structural components for obvious damage, broken parts, and cracks in
welds.
5 Ladder or steps for damage and debris (ladders must be firmly secured to the
platform).
6 Operating and emergency controls for proper functioning.
7 Placards and warning signs for cleanliness, readability of control signs, rated
capacity, and operating manual.
8 Platform assembly for loose and missing parts, missing or loose lock pins and
bolts.
9 Platform base for structural damage, holes or cracked welds, dirt, grease, or
oil that can create a hazard.
10 Access ways for ease of movement.
11 Protection system operation.
12 Correct operation of the safety devices.
13 Correct operation of elevating, rotating, and drive functions.
14 Brakes.
15 Stabilisers.
12.6.2.B‐ Periodical inspections
These inspections must be performed after 200 h of operation or every month,
whichever comes first. The interval between inspections may vary depending on
Boom Lift Models X17JPLUS
MAINTENANCE
151
Advertisement
Table of Contents
