JLG X17JPLUS Operator, Safety, And General Maintenance Manual page 127

MUX17JP021602
Fig. 131 Emergency BY‐PASS icon
Use the travel control with extreme care to avoid causing damage to
the machine or people. Move to a suitable position for carrying out
procedure described in ʺMachine realignment (p. 122)ʺ, used to reali‐
gn the machine.
At the end of the operation release the key, remove it, put it back in its original
position and close the electrical components compartment.
The electronic control board records every time the safety device bypass key is used.
Boom Lift Models X17JPLUS
USING THE MACHINE
Fig. 132 Emergency BY‐PASS actived
125