MUX17JP021602
7.9. FIRE PREVENTION
7.10.PREVENTING DAMAGE CAUSED BY WASHING THE MACHINE
BEFORE WASHING THE MACHINE, ALWAYS REMEMBER TO REMOVE
THE REMOTE CONTROL AND CORRECTLY CLOSE THE REMOTE CON‐
TROL AND EQUIPMENT CONNECTION SOCKETS LOCATED ON THE MA‐
CHINE.
7.10.1.Cleaning the machine
When washing the machine, the ignition block must be disengaged, the key
removed and the emergency stop button pressed.
Keep the area around the motor clean,
removing fragments of wood, paper
and other flammable products; clean
any fuel leaks as these may be a poten‐
tial cause of fire. Petrol is extremely
flammable and explosive in particular
conditions. Refuel in well ventilated
areas and with the engine at rest.
Avoid smoking and producing sparks
in the refuelling and fuel storage area.
After refuelling, make sure to put back
the cap correctly. Take care to avoid
touching the exhaust silencer when
this is hot, i.e. with the machine run‐
ning or soon after stopping the engine.
Do not direct high pressure jets
towards the electrical components
while washing the machine. Do not use
chemical detergents or petrol that
would damage the plastic parts and the
painting.
Boom Lift Models X17JPLUS
TECHNICAL INFORMATIONS
27