Starting The Electric Motor - JLG X17JPLUS Operator, Safety, And General Maintenance Manual

MUX17JP021602
The engine must be started with all the control buttons and joysticks
in neutral position. Always make sure there are no foreign objects
(e.g. Branches) that may accidentally operate a control, as the pla‐
tform may move suddenly out of the operatorʹs control and cause se‐
rious harm to things and/or people. Make sure that all the manual
controls for the proportional valves are at rest.
11.4.3.Starting the electric motor
• Before starting the motor, be clearly aware of all the procedures described in
the USER AND OPERATION MANUAL and get familiar with the meaning of the
safety stickers.
• Examine the safety rule summary table in the manual and follow all the in‐
structions given therein.
• Power the machine with an electric cable through the connection positioned
at the bottom near the electric motor. Close the switch located in the electrical pa‐
nel near the motor.
Fig. 81 Power line connection
Before connecting the machine to the main power supply:
a Make sure that the specifications of the power line correspond to the voltage
and frequency indicated on the electric motor rating plate.
b Check the condition of the power cable; it must be sized for a rated power of
2.2 kW. Note that:
Boom Lift Models X17JPLUS
USING THE MACHINE
Fig. 82 Main electric switch
89