JLG X17JPLUS Operator, Safety, And General Maintenance Manual page 184

SAFETY STANDARDS FOR TRANSPORT
It is absolutely forbidden to lift the machine if it is not completely closed and ali‐
gned in transport position with the 4 stabilizers completely closed and lifted from
ground. Before proceeding verify the weight of the machine in the technical data
of this manual and make sure that the forklift is suitable for this weight. Verify
also the dimensions of the forks and make sure that the positioning of the load is
in compliance with the requirements of the forklift. Proceed approaching careful‐
ly to the machine paying attention not to collide with parts of it and cause dama‐
ges to the structure. During the operations of lifting and transport follow the
requirements and dispositions prescribed for the use of the lifting device and/or
by the security officer of the working environment in which the operation is per‐
formed. This operation must be performed by appropriate personnel possessing
the regulatory requirements to the use of the lifting device chosen.
The manufacturer of the Platform is not responsible in any way for damages
caused to the machine, lifting device or persons and/or objects due to impro‐
per execution of this operation.
182
Fig. 168 Forklift lifting points
Boom Lift Models X17JPLUS
MUX17JP021602