JLG X17JPLUS Operator, Safety, And General Maintenance Manual page 90

USING THE MACHINE MUX17JP021602
• Examine the safety rule summary table in the manual and follow all the in‐
structions given therein;
• Make sure that the fuel cap is properly tightened;
• Make sure that there are no residues of petrol or flammable materials near the
exhaust silencer or other areas subject to overheating;
• Make sure that no one is standing near the machine;
• Make sure that all the emergency STOP buttons are released; this condition
can be checked on the remote control display, where no icon should appear in po‐
sition 7 ʺDisplay (p. 53)ʺ. If the operator attempts to start the machine with the
emergency stop button still pressed, an error message will appear on the display
when the start button is pressed.
Fig. 80 Error, ignition attempt with stop pressed
• Once positioned the main key to the ON position to wait for the complete igni‐
tion of the electronic systems of the machine and the activation of the remote con‐
trol. At this point, press the button on the remote control to start the engine.
• The petrol engine starter is automatic.
• If the operator attempts to start one of the two motors while the other is alre‐
ady running, starting will be impossible and the icon showing the motor already
on will appear at the centre of the screen.
The machines with petrol engines are equipped with an automatic preheating sy‐
stem. Pushing button 0 (10) on remote control the running system is automatical‐
ly set at 2200 rpm for 20 seconds in order to preheat the engine and improve the
starting phases of use. If with this function active a movement that needs a diffe‐
rent rotation system is attempted, the machine will automatically exit from the
preheating mode and will perform the movement at the necessary speed. See pa‐
ragraph concerning the functions of the remote control ʺPush buttons (p. 59)ʺ be‐
fore using this option.
88 Boom Lift Models X17JPLUS