You Can Execute An Assignment Via Customer Login As Follows - Siemens SINUMERIK 840D sl Commissioning Manual

Licensing
14.8 Assigning via Web License Manager
Note
License Key via e-mail
If you have an e-mail address, you can have the option (checkbox) of receiving the
License Key by e-mail. Advantage: the entry of the License Key to the control system is
simplified.
5. After completing the assignment process, enter the License Key displayed on the Web
License Manager into the licensing dialog of the HMI user interface.
HMI Advanced/HMI Embedded:
6. Confirm the entry of the new License Key by pressing the softkey: "Transfer".
14.8.2

You can execute an assignment via customer login as follows

Background
For the customer login, log on to a computer (PC/PG) connected to the Internet with the user
name and password in the Web License Manager. All licenses released for this user name in
the framework of the license management may then be assigned to a piece of hardware.
After completing the assignment process, the new License Key is displayed. This must then
be entered in the licensing dialog of the HMI components used.
Requirements
The following prerequisites must be met in order to assign a license to a piece of hardware
via customer login and HMI user interface:
● The HMI component is connected with the control system (NCU) on which the license
● A computer (PC/PG) with Internet connection and browser is available.
● The login data for the customer login is available:
Assigning a license to a piece of hardware
1. Determine the hardware serial number and the product name (HMI Advanced/HMI
Embedded: "Hardware type") via the HMI licensing dialog box.
HMI Advanced/HMI Embedded:
Note
Ensure that the hardware serial number displayed is also really the one you want to make
the assignment for. The assignment of a license to a piece of hardware cannot be
reversed via the Web License Manager.
272
Operating-area switchover: Commissioning > Key: etc. (">") > Licenses > Overview
should be assigned. Both components have been booted.
– User name
– Password
Operating-area switchover: Commissioning > Key: etc. (">") > Licenses > Overview
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive