Creating A Control Image (Offline) - Siemens SINUMERIK 840D sl Commissioning Manual

Licensing
14.9 Assigning via Automation License Manager
14.9.7

Creating a control image (offline)

Background
It is essential to create a control image (offline) in the following situations:
● The license information must later be transferred to the control system (online).
● The computer (PC/PG) on which the Automation License Manager is installed is not
● The license information for a control system should be saved as an archive file for the
Requirements
A control image (offline) can only be created if the Automation License Manager is
communicating with the control system.
Note
A PTP link (Peer-To-Peer) via Ethernet and TCP/IP requires a crossed Ethernet cable
(twisted pair crossed 10baseT/100baseTX Ethernet cable).
Procedure using drag-and-drop
Perform the following steps to create a control image (offline) of the control system (online)
by drag-and-drop:
1. In the navigation area of the Automation License Manager, open:
Technology folder:
system (online)
2. Select any line from the license information displayed in the object area by clicking with
the left mouse button.
3. Drag the selected line to the desired target and release the mouse button.
The following objects can be selected as the target:
●
●
●
●
●
282
simultaneously connected to the Internet and the control system. This means the license
information must be transferred to the control system (online) in three separate steps.
– Intranet or PTP link to control system: Creating a control image (offline) in the
Automation License Manager
– Internet connection: Transferring license information to the control image (offline) by
license requirement alignment
– Intranet or PTP link to control system: Transferring license information from the control
image (offline) to the control system (online) in the Automation License Manager
purpose of archiving or customer support.
"SINUMERIK online" > Control folder
by clicking with the left mouse button.
Computer
Drive
Storage folder
Control folder "offline"
Control image (offline)
and choose the control
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive