Siemens SINUMERIK 840D sl Commissioning Manual page 268

Licensing
14.5 License database
● Customer login
Note
Customer login
You can obtain a customer login from Siemens A&D Mall under menu item:
"Registration". The Internet address is: http://mall.automation.siemens.com/
Currently, access is not yet possible for all countries.
Various license information
As indicated above, only the license information in the license database represents the
current status regarding a piece of hardware. Differences may arise between the license
information available for a piece of hardware and that of the license database due to:
● loading older archive data into the NCK (data restoration from a series-commissioning file
● assigning licenses to hardware without transferring the modified license information for
As a result, a more limited license requirement (possibly no license requirement) may be
displayed than indicated on the HMI user interface of the control system for a license
requirement alignment by Automation License Manager.
To align the license information, a transfer should be carried out for the current license
information of the license database for the hardware control system (online).
268
The customer login occurs with:
– User name
– Password
The customer login enables the assignment of all the licenses available to the user that
are delivered at the time of the login and have not yet been assigned to any hardware.
Here, the license numbers of licenses that can still be assigned need not be directly at
hand, instead these are displayed from within the license database.
after a service job)
the hardware control system (online)
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive