Installing The Automation License Manager - Siemens SINUMERIK 840D sl Commissioning Manual

14.9.2

Installing the Automation License Manager

Background
The following components need to be installed for the license management of SINUMERIK
solution line License Keys:
● Automation License Manager
● SINUMERIK plug-in
● HMI basic software
System requirements
Hardware
● Computer: Industrial PC, programming device, etc.
● Work memory: >= 128 MB
● Free hard-disk storage:
● Operating system: Windows XP
Execution
1. Launch the installation program for the Automation License Manager from "SETUP.EXE"
2. Launch the installation program for the SINUMERIK plug-in from "SETUP.EXE" and
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
The Automation License Manager is loaded by the installation routine only if no manager
or a manager version with a lower version number is installed on the computer (PC/PG).
The SINUMERIK plug-in is loaded by the installation routine only if it finds a version of the
Automation License Manager installed on the computer (PC/PG).
The HMI basic software is loaded by the installation routine only if no HMI software or a
version with a lower number is installed on the computer (PC/PG).
Note
The Automation License Manager is used for all Siemens A&D products, e.g. SIMATIC
STEP7. As versions of the Automation License Manager are upwards compatible, we
always recommend using the version with the highest version number, irrespective of the
source of supply (e.g. SINUMERIK or SIMATIC product CD, download via A&D Mall,
etc.).
5 MB (SINUMERIK plug-in)
+ 32 MB (Automation License Manager)
+ 300 MB (HMI basic software)
and follow the instructions for the installation.
follow the instructions for the installation.
The HMI basic software can be installed as part of this process.
14.9 Assigning via Automation License Manager
Licensing
275