Siemens SINUMERIK 840D sl Commissioning Manual page 283

Result
A control image (offline) has been created from the license information of the control system
(online) in the selected target:
●
●
●
●
●
Procedure using menu command: "Upload from target system"
Perform the following actions to create a control image (offline) of the control system (online)
using menu command: "Upload from target system":
1. In the navigation area of the Automation License Manager, open: Technology folder:
2. Create the control image (offline)
Result
A control image (offline) has been created from the license information of the control system
(online) in the default storage folder:
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
<computer> → drive C:\<default storage folder>
<drive>:\SINUMERIK\<storage folder>\<control folder "offline">
<storage folder>\<control folder "offline">
<control folder "offline">
Control image (offline): The control image (offline) was overwritten with the license
information of the control system (online)
"SINUMERIK online" > Control folder
clicking with the left mouse button.
target system
14.9 Assigning via Automation License Manager
and choose the control system (online)
using menu command: License Key > Upload from
Licensing
by
283