Servo Trace - Siemens SINUMERIK 840D sl Commissioning Manual

Optimize the drive.

11.4 Servo trace

11.4 Servo trace
Introduction
A trace represents monitored values and signals over a period of time. Servo trace provides
functions with a graphical user interface for controlling and monitoring drive/servo signals
and states.
Basic display of servo trace
The basic display of the trace is reached via the operating area "Commissioning" >
"Optimization/Test" > " Servo trace".
Figure 11-10 "Servo trace measurement" basic display
Parameterization in the basic display
The following selection is made in the basic display for the servo trace measurement:
● Axis/spindle selection
● Measuring signal
● Measurement time
● Trigger time
● Trigger type
● Trigger threshold
204
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive