Machine And Setting Data - Siemens SINUMERIK 840D sl Commissioning Manual

Fundamentals

15.5 Machine and setting data

15.5 Machine and setting data
Introduction
Adaption of the control at the machine is carried out using the machine and setting data.
Parameter assignment
● Machine data
● Setting data
● Option data
310
The machine data (MD) are divided into the following areas:
– General machine data
– Channel-specific machine data
– Axis-specific machine data
– Machine data for control unit
– Machine data for infeed
– Machine data for drives
The setting data (SD) are divided into the following areas:
– General setting data
– Channel-specific setting data
– Axis-specific setting data
For enabling options. The option data are included in the scope of delivery.
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive