10.5
Parameterize axis data
Reference
See also
Axis data (Page 318)
Axis assignment (Page 323)
Axis names (Page 326)
10.5.1
Incremental measuring system settings
Rotary measuring system
The diagrams below show the general possibilities of arranging a rotary incremental
measuring system with regard to motor and load, as well as the resulting values for the
appropriate machine data.
Figures equally apply to rotary axes, modulo axis and spindles.
Linear axis with encoder on the machine
Figure 10-5
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
Linear axis with encoder on motor
NCK start-up
10.5 Parameterize axis data
125