Mazda RX-8 Manual page 15

Cotter pins
Nylon nuts
Depending on location:
•
Sealant and gaskets, or both, should be applied to specified locations. When sealant is applied,
parts should be installed before sealant hardens to prevent leakage.
Oil should be applied to the moving components of parts.
Specified oil or grease should be applied at the prescribed locations (such as oil seals) before
reassembly.
Adjustment
Use suitable gauges and testers when making adjustments.
•
Rubber Parts and Tubing
Prevent gasoline or oil from getting on rubber parts or tubing.
•
(w) RX8-General Info
Page 15