Upper and Lower Limits
When the data indicates upper and lower limits, the converted values are rounded down if the SI unit
•
value is an upper limit and rounded up if the SI unit value is a lower limit. Therefore, converted values
for the same SI unit value may differ after conversion. For example, consider 2.7 kgf/cm
following specifications:
210260 kPa {2.12.7 kgf/cm
o
270310 kPa {2.73.2 kgf/cm
o
The actual converted values for 2.7 kgf/cm
•
used as an upper limit, so the converted values are rounded down to 260 and 38. In the second
specification, 2.7 is used as a lower limit, so the converted values are rounded up to 270 and 39.
Notes:
2
, 3038 psi}
2
, 3945 psi}
2
are 264 kPa and 38.4 psi. In the first specification, 2.7 is
2
in the
(w)
RX8-General Info
Page 48