Input Fieldbus Variable Usint Extended 1 - WAGO 750 Series Manual

Instance 1..255 (1. to 255. Input variable)
Attribute ID
1
This instance corresponds to the PFC's input variables located at address
%IB2552-%IB2807 in a WAGO-I/O-PRO application.
Common Services
Service code
0E hex
10 hex
7.3.2.22 Input fieldbus variable USINT Extended 1 (A1
Same as the Input Fieldbus Variable USINT Class (A0
contains the PLC input variables 256..510.
This instance corresponds to the PFC's input variables located at address
%IB2808-%IB3061 in a WAGO-I/O-PRO application.
7.3.2.23 Input fieldbus variable USINT Extended 2 (A2
Same as the Input Fieldbus Variable USINT Class (A0
contains the PLC input variables 511..512.
This instance corresponds to the PFC's input variables located at address
%IB3062-%IB3063 in a WAGO-I/O-PRO application.
Class attribute max. Instance = 2
7.3.2.24 Output fieldbus variable USINT (A3
Class
Attribute ID Access
1
2
Instance 1..255 (1. to 255. Output variable)
Attribute ID Access
1
This instance corresponds to the PFC's output variables located at address
%QB2552-%QB2807 in a WAGO-I/O-PRO application.
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
Access Name Data type
Set Fb_In_Var USINT
Service available
Service Name
Class Instance
yes yes Get_Attribute_Single
no yes Set_Attribute_Single
Name
Get Revision
Get Max
Instance
Name
Get Fb_Out_Var
Ethernet/IP (Ethernet/Industrial Protocol)
Description
Fieldbus Input variable of the
PLC
Description
Supplies contents of the appropriate attribute
Modifies an attribute value
)
hex
Data type Description
UINT Revision of this object
UINT Max. number of instances
Data type Description
Fieldbus Output variable of
USINT
the PLC
Object model
Default value
0
)
hex
), however this
hex
)
hex
), however this
hex
Default value
1 (0x0001)
255 (0x0FF)
Default value
0
• 205