Appendix B Flowmeter Installation Types And Components; Overview; Model 1500/2500 Transmitters; Installation Diagrams - Emerson Micro Motion 1000 Series Configuration And Use Manual

Appendix B
Flowmeter Installation Types and Components
B.1

Overview

This appendix provides illustrations of different flowmeter installations and components, for:
•

Model 1500/2500 transmitters

• Model 1700/2700 transmitters
B.2 Model 1500/2500 transmitters
B.2.1

Installation diagrams

Model 1500/2500 transmitters can be installed in two different ways:
• 4-wire remote
• Remote core processor with remote transmitter
See Figure B-1.
B.2.2

Component diagrams

In remote core processor with remote transmitter installations, the core processor is installed
stand-alone. See Figure B-2.
B.2.3

Wiring and terminal diagrams

A 4-wire cable is used to connect the core processor to the transmitter. See Figure B-3 (standard core
processor) or Figure B-4 (enhanced core processor).
Figure B-5 shows the transmitter's power supply terminals.
Figure B-6 shows the output terminals for the Model 1500 transmitter.
Figure B-7 shows the output terminals for the Model 2500 transmitter.
Configuration and Use Manual 169