Table of Contents
Advertisement
Using the Transmitter
Figure 7-1
Display status LED
Status LED
Scroll optical
Table 7-2
Priorities reported by the Model 1700/2700 status LED
Status LED state
Green
(1)
Flashing green
Yellow
(1)
Flashing yellow
Red
(1)
Flashing red
(1) If the LED blinking option is turned off (see Section 8.14), the status LED will flash only during calibration. It will not
flash to indicate an unacknowledged alarm..
Alarms in the alarm list are listed by number. To view specific alarms in the list:
1. Activate and hold
the screen. See Figure 7-1.
2.
Select
.
3. If the alternating words
4. If the words
5.
to view each alarm in the list. See Section 12.12 for an explanation of the alarm codes
Scroll
reported by the display. The status LED changes color to reflect the severity of the current
alarm, as described in Table 7-2.
6.
until the word
Scroll
7.
.
Select
58
switch
Scroll
and
Select
ACK ALL
appear, go to Step 6.
NO ALARM
appears.
EXIT
Alarm priority
No alarm – normal operating mode
Unacknowledged corrected condition
Acknowledged low severity alarm
Unacknowledged low severity alarm
Acknowledged high severity alarm
Unacknowledged high severity alarm
simultaneously until the words
appear,
.
Scroll
Micro Motion Series 1000 and Series 2000 Transmitters
Select optical switch
SEE ALARM
appear on
Advertisement
Table of Contents
