Emerson Micro Motion 1000 Series Configuration And Use Manual page 250

Menu Flowcharts – Model 2700 CIO Transmitters
Figure G-3 ProLink II configuration menu continued
Channel
Channel B
• Type assignment
• Power type
Channel C
• Type assignment
• Power type
Discrete output
Discrete output 1/2
• DO1/2 assignment
• DO1/2 polarity
• DO1/2 fault action
240
ProLink >
Configuration
Analog output
Primary/secondary output
• PV/SV is
• Lower range value
• Upper range value
• AO cutoff
• AO added damp
• LSL
• USL
• Min span
• AO fault action
• AO fault level
• Last measured value timeout
Discrete input
• Assignment
• Polarity
Additional configuration options
Frequency
• Tertiary variable
• Scaling method
• Freq factor
• Rate factor
• Pulses per unit
• Units per pulse
• Freq pulse width
• Last measured value timeout
• Freq fault action
• Freq output mode
• Freq output polarity
Sensor simulation
• Enable/disable
Mass flow
• Wave form
• Fixed value
• Period
• Minimum
• Maximum
Density
• Wave form
• Fixed value
• Period
• Minimum
• Maximum
Temperature
• Wave form
• Fixed value
• Period
• Minimum
• Maximum
Micro Motion Series 1000 and Series 2000 Transmitters