Emerson Micro Motion 1000 Series Configuration And Use Manual page 72

Using the Transmitter
Table 7-3 Totalizer and inventory control methods
Function name
Stop all totalizers and inventories (mass, volume, ED, and API)
Start all totalizers and inventories (mass, volume, ED, and API)
Reset mass totalizer only
Reset volume totalizer only
Reset API totalizer only
Reset ED totalizer only
Simultaneously reset all totalizers (mass, volume, and API)
Simultaneously reset all inventories (mass, volume, and API)
Individually reset inventories
(1) These actions are available only if the associated display function is enabled. See Section 8.14.
(2) This function is available only if the corresponding totalizer is configured as a display variable (see Section 8.14.6).
(3) If enabled in the ProLink II preferences.
With the display
You can use the display to start and stop all totalizers and inventories simultaneously, or to reset
individual totalizers. See the flowchart in Figure 7-3. You cannot reset any inventories with the
display.
The display must be configured to show the appropriate totalizer (see Section 8.14.6), and the
corresponding display function must be enabled (see Section 8.14).
62
Communicator ProLink II
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
(3)
No Yes
(3)
No Yes
Micro Motion Series 1000 and Series 2000 Transmitters
(1)
Display
Yes
Yes
(2)
Yes
(2)
Yes
(2)
Yes
(2)
Yes
No
No
No