Mass Flow Units - Emerson Micro Motion 1000 Series Configuration And Use Manual

Required Transmitter Configuration
Figure 6-5 Configuring measurement units
ProLink II
ProLink >
Configuration
Flow
Density
Temperature
Pressure
6.4.1

Mass flow units

The default mass flow measurement unit is
measurement units.
If the mass flow unit you want to use is not listed, you can define a special measurement unit for mass
flow (see Section 8.5).
Table 6-2 Mass flow measurement units
Display ProLink II
G/S g/s
G/MIN g/min
G/H g/hr
KG/S kg/s
KG/MIN kg/min
KG/H kg/hr
KG/D kg/day
T/MIN mTon/min
T/H mTon/hr
T/D mTon/day
LB/S lbs/s
LB/MIN lbs/min
LB/H lbs/hr
LB/D lbs/day
ST/MIN sTon/min
ST/H sTon/hr
ST/D sTon/day
48
Communicator
On-Line Menu >
Detailed Setup
Config field dev var
Mass flow unit
Communicator
g/s
g/min
g/h
kg/s
kg/min
kg/h
kg/d
MetTon/min
MetTon/h
MetTon/d
lb/s
lb/min
lb/h
lb/d
STon/min
STon/h
STon/d
Units
Flow
Density
Temperature
Pressure
. See Table 6-2 for a complete list of mass flow
g/s
Unit description
Grams per second
Grams per minute
Grams per hour
Kilograms per second
Kilograms per minute
Kilograms per hour
Kilograms per day
Metric tons per minute
Metric tons per hour
Metric tons per day
Pounds per second
Pounds per minute
Pounds per hour
Pounds per day
Short tons (2000 pounds) per minute
Short tons (2000 pounds) per hour
Short tons (2000 pounds) per day
Micro Motion Series 1000 and Series 2000 Transmitters
Display
Off-line maint >
Off-line config
Mass
Vol (or GSV)
Density
Temperature
Pressure