For More Information - Agilent Technologies X Series Programmer's Manual

Measurement Synchronization with LXI-B

For More Information

29. Configure the
MXA's alarm
30. Wait for the
"OperationComplete"
instrument event
33. Read measurement
results.
For More Information
For more information on using LXI see the Agilent web site dedicated to
LXI instrumentation:
www.agilent.com/find/lxi
Agilent LXI Application Notes:
Using LXI to go beyond GPIB, PXI and VXI (AN 1465-20)
10 Good Reasons to Switch to LXI (AN 1465-21)
Transitioning from GPIB to LXI (AN 1465-22)
104
:TRIGger:LXI:ALARm:PERiod
"ALARM0",1.0
:TRIGger:LXI:ALARm:REPeat
"ALARM0",5
:TRIGger:LXI:ALARm:TIME
"ALARM0",<startTime>,0.5
:TRIGger:LXI:ALARM:ENABled
"ALARM0",1
Detect the peer to peer traffic
using Interactive LXI. To
programmatically listen for LXI
peer to peer messages, use the
IOLibraries TMFramework LXI
library.
:FETCH:LIST?
These commands are
sent to the MXA.
The repeat parameter
should match the
number of frequencies
in the list.
The first alarm will
fire 0.5 seconds after
the MXG's.
A new alarm will fire
every second.
When the MXA has
completed its list, it
will send the peer to
peer message
"OperationComplete"
with a rising edge.
This query is sent to
the MXA.
Chapter 3