Table of Contents
Advertisement
Troubleshooting
Compatible Network Analyzers
Compatible Network Analyzers
The devices in this kit and their data are compatible with the PNA series network analyzers. The USB drive
provided contains the unique factory-measured S-parameter data for each device in this kit. It also contains
the factory measurement uncertainty used in the PNA system verification procedure to calculate the test
limits.
Older models of this verification kit provided data disks for the 8510, 8720 and 8722 analyzers. Since these
analyzers have been discontinued, the data disks are no longer provided in new kits. When old verification
kits that include the data disks are returned to Agilent for recertification, the disks will be reproduced with
new data for each device in the kit. Please specify your VNA model(s) when returning kits for service or
when ordering kit replacement parts.
Where to Look for More Information
This manual contains limited information about PNA series network analyzer system operation. For detailed
information on using a PNA, refer to the PNA Help system. To do so, press the Help key on the front panel of
the PNA.
If you need additional information, see
"Contacting Agilent" on page
5-5.
Returning a Kit or Device to Agilent
If your kit or device requires service, contact Agilent Technologies for information on where to send it. See
"Contacting Agilent" on page
5-5. Include a service tag (located near the end of this manual) on which you
provide the following information:
• your company name and address
• a technical contact person within your company, and the person's complete telephone number
• the model number and serial number of the kit
• the model number(s) of your network analyzer(s)
• the part number and serial number of each device
• the type of service required
• a detailed description of the problem and how the device was being used when the problem occurred
(such as calibration or measurement)
5-4
85051B
Advertisement
Table of Contents
Troubleshooting
