Connect Usb Host - Honeywell Thor VM1 User Manual

Connect USB Host

Host / Client Y Cable
D9 Connector
See
1. Seat the D9 connector firmly over the USB (Standard Dock) or USB1 (Enhanced
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB-host connector provides a connector for a USB device such as a USB
4. Secure the cables to the Thor VM1 with
Dual Host Y Cable
See
1. Seat the D15 connector firmly over the USB2 (Enhanced Dock only) connector on
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB-host connectors provide a connector for a USB device such as a USB
4. Secure the cables to the Thor VM1 with
USB Scanner
There are several ways to attach a USB scanner:
•
•
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
USB and USB1 Connector
Dock) connector on the dock.
thumb drive.
D15 Connector
USB2 Connector for connector pinouts.
the dock.
thumb drive.
A USB scanner can be attached to the USB host port on the Enhanced Dock.
A USB scanner can be attached to the host port on either USB adapter Y-cable.
USB Host Connector
USB Client Connector
for connector pinouts.
Strain Relief Cable
USB Host Connectors
Strain Relief Cable
Clamps.
Clamps.
101