Honeywell Thor VM1 User Manual page 112

•
To use the CBL-500-300-S00 cable:
RJ50 (10-pin) Connector
1. Seat the D9 connector of the cable over the USB or USB11 connector on the Thor
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. Follow the instructions provided with the scanner to attach the RJ50 end of the
See
102
Certain USB scanners can be attached directly to the USB or USB-1 connector using
cable CBL-500-300-S00, as shown below.
VM1 dock.
cable to the scanner.
USB Host to Scanner Cable
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
D9 Connector
for pinout details.