Honeywell Thor VM1 User Manual page 141

Clear Button
Deletes all devices from the Device table that are not currently paired. A dialog box is
presented, "Delete all disconnected devices?" Tap the Yes button to remove discon-
nected or deleted devices from the device table. The devices are removed from the
Device table after closing and reopening the Bluetooth window. Tap the No button to
make no changes.
Bluetooth Device Menu
Prerequisite: The Discover button has been clicked and there are Bluetooth devices
listed.
Click on a device in the list to highlight it. Double-click the highlighted device to display
the Bluetooth Device right-click menu as shown below. The Bluetooth device does not
need to be active.
Right-Click Menu Options
Pair as Scanner
Pair as Printer
Disconnect
Delete
Properties
Bluetooth Device Properties
Data on the Bluetooth Properties panel cannot be changed by the user. The data dis-
played is the result of the device Query performed during the Discovery process.
The Status dialog box reflects the current state of the highlighted device.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Receive data from the highlighted Bluetooth scanner or Bluetooth imager.
Send data to the highlighted Bluetooth printer.
Stop the connection between the Thor VM1 and the highlighted paired Bluetooth
device.
Remove an unpaired device from the Bluetooth device list. The highlighted device
name and identifier is removed from the Thor VM1 Bluetooth Devices panel after the
user taps OK.
More information on the highlighted Bluetooth device.
131