Procedure - U Bracket Assembly - Honeywell Thor VM1 User Manual

Procedure - U Bracket Assembly

Equipment Needed: Sockets and a Torque wrench capable of measuring to 50 inch
pounds (5.64±.56 N/m).
Note: Torquing tool is not supplied by Honeywell.
Torque Measurement
You will need a torquing tool capable of torquing to 35-50 inch pounds (1.10 N/m).
Torque all screws and bolts according to the following table:
For these bolts...
1/4-20x5/8 Bolts
M5x16mm Bolts
1/4 Bolts (user supplied)
Mounting Positions
The adapter bracket can be mounted in a high or low position, depending on viewing
position, as shown below.
Additionally, the slotted U bracket allows the Thor VM1 to be mounted vertically or tilted
forward or backward for best viewing angle.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Torque to
50 in/lb (5.6 N/m)
35 in/lb (4.0 N/m)
50.0±5 in/lb (5.64±.56 N/m)
[
61