Honeywell Thor VM1 User Manual page 170

Factory Default Settings
Admin Login
Radio
Active Config/Profile
Regulatory Domain
The Main tab displays information about the wireless client device including:
•
•
•
•
•
•
•
The Active Profile can be switched without logging in to Admin mode. Selecting a differ-
ent profile from the drop down list does not require logging in to Administrator mode.
The profile must already exist. Profiles can be created or edited after the Admin login
password has been entered and accepted.
When the profile named "ThirdPartyConfig" is chosen as the active profile, the Summit
Client Utility passes control to Wireless Manager for configuration of all client and
security settings for the network module.
The Disable Radio button can be used to disable the network card. Once disabled, the
button label changes to Enable Radio. By default the radio is enabled.
The Admin Login button provides access to editing wireless parameters. Profile and
Global may only be edited after entering the Admin Login password.
The password is case-sensitive.
Once logged in, the button label changes to Admin Logout. To logout, either tap the
Admin Logout button or exit the SCU without tapping the Admin Logout button.
160
SCU (Summit Client Utility) version
Driver version
Radio Type (ABGN is an 802.11 a/b/g/n radio).
Regulatory Domain
Copyright Information can be accessed by tapping the About SCU button
Active Config profile / Active Profile name
Status of the client (Down, Associated, Authenticated, etc.).
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
SUMMIT
Enabled
Default
FCC, ETSI or Worldwide