Vm3D Enhanced Dock - Honeywell Thor VM1 User Manual

VM3D Enhanced Dock

Caution: This dock is designed for DC power vehicle-mounted
applications only.
SKU
Power Connector
COM1Connector
COM2 Connector
CANBUS/AUDIO Connector
USB1 Connector
USB2 Connector
USB Host Connector
Ethernet
Power Switch
Input Power
External Power Supply
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
VM3001VMCRADLE
6-pin connector:
Direct10-60V DC input power
Optional external converter for extended range DC (60-150 VDC)
9-pin male, RS-232 serial port, COM1 with power on pin 9
9-pin male, RS-232 serial port, COM2 with power on pin 9
15-pin male, CANbus/Audio connector supports either audio/microphone via adapter cable or
J1939 Female and J1939 Male connectors via CANbus cable
9-pin female, USB connector supports USB host port via adapter cable
Note: USB Client port may not be supported by the Thor VM1 operating system.
15-pin female, USB connector supports two USB host ports via adapter cable
One USB Host connector behind waterproof cap
One RJ45 Ethernet connector behind waterproof cap
Note: The Ethernet port is not supported with the Windows Embedded Standard 2009
operating system.
Sealed power switch
DC Input Voltage: 10- 60 VDC,
Input Current: 4.6 Amps (typical),
Input Fuse: 8A Time Delay. Replace with same size, rating and type of fuse:
• Littelfuse 0215008.MXP
• Cooper Bussmann BK1/S506-8-R
• Bel Fuse 5HT 8-R
or equivalent.
50-150 VDC DC power supply available for vehicles over 60 VDC
Note: Use dock VMX005VMCRADLE (VMXD Enhanced Dock of Off-Vehicle Use) in AC power
applications.
233