Honeywell Thor VM1 User Manual page 110

Table Stand
When the Thor VM1 is used in an office environment, it can be mounted in a table stand.
To use the table stand:
1. Attach the RAM ball to the RAM Metal Table Stand with the supplied screws and
2. If not present, attach a RAM ball to the VMXD off-vehicle dock.
3. Slide the size D RAM arm over the ball on the table mount.
4. Insert the ball on the dock into the RAM arm and tighten the knob on the RAM arm
5. If the Thor VM1is not already mounted to the dock,
100
nuts.
using the supplied RAM wrench.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Place Thor VM1 in the Dock.