Honeywell Thor VM1 User Manual page 142

Settings
Note: These options can still be checked or unchecked whether Bluetooth connection is enabled
or disabled.
Turn Off Bluetooth
Tap the button to toggle the Bluetooth client On or Off. The button title changes from
Turn Off Bluetooth to Turn On Bluetooth.
Default
The default value is Bluetooth On.
Options
Option
Computer is
connectable
Computer is
discoverable
Prompt if devices
request to pair
Continuous Search
132
Information
This option is Enabled by default.
Disable this option to inhibit Thor VM1 connection initiated by a Bluetooth
scanner.
This option is Disabled by default.
Enable this option to ensure other devices can discover the Thor VM1.
This option is Enabled by default.
A dialog box appears on the Thor VM1 screen notifying the user a Bluetooth
device requests to pair with the Thor VM1.
The requesting Bluetooth device does not need to have been Discovered by the
Thor VM1 before the pairing request is received.
Tap the Accept button or the Decline button to remove the dialog box from the
screen.
In some cases, if a Bluetooth device is already paired this setting cannot be
changed. If this is the case, an error message is displayed and the option is not
changed. The Bluetooth device must be disconnected before changing this
setting.
This option is Disabled by default.
When enabled, the Bluetooth connection never stops searching for a device it
has paired with when the connection is broken (such as the paired device
entering Suspend mode, going out of range or being turned off). When disabled,
after being enabled, the Thor VM1 stops searching after 30 minutes.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide