Honeywell Thor VM1 User Manual page 210

1. Copy the certificate from the PC to the Thor VM1.
2. Locate the certificate file (it has a .PFX extension) and double-click on it. If clicking
3. The certificate import wizard starts. Tap Next.
4. Confirm the certificate file name and location.
5. Tap Next.
6. You are prompted for the password that was assigned when the certificate was
7. It is not necessary to select either of the checkboxes displayed above.
8. Enter the password and tap Next.
9. On the next screen, allow Windows to automatically select the certificate store, then
Manually Initiate Certificate Installation
If the Certificate Wizard does not start automatically when you double-tap the certifi-
cate .PFX file:
1. Select Start > Run and type certmgr.msc in the text box and tap OK (Windows
2. Select Start and type certmgr.msc in the search box and press Enter (Windows
3. In the left pane, right-click Personal and select All Tasks > Import.
4. The Certificate Import Wizard starts.
5. Tap Next and use the Browse.. button to locate the User certificate copied to the
6. The certificate filename and path are displayed. Tap Next.
200
on the certificate file does not launch the certificate import wizard, follow the
Manually Initiate Certificate Installation
exported.
click Next and Finish. An import successful message is displayed.
Embedded Standard 2009 only).
Professional 7 and Windows Embedded Standard 7 only).
Thor VM1. If necessary, change the file type drop down list at the bottom of the
explorer window from *.cer to *.pfx. After selecting the .PFX file, tap Open.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
before continuing the instructions below.