Honeywell Thor VM1 User Manual page 69

Step 5 - Attach Scanner Holder (Optional)
This step is only for use with the Enhanced Dock.
1. Attach the accessory RAM ball to the Enhanced Dock. There are two mounting pro-
2. Attach the RAM ball to the back of the scanner holder.
3. Slip the RAM arm over the accessory RAM ball.
4. Slip the RAM ball on the scanner holder into the RAM arm.
5. Tighten the knob on the RAM arm while adjusting to the desired angle.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
visions, one on either side of the Enhanced dock and either can be used to mount
the scanner holder.
Note: Some components omitted for detail clarity.
59