Bluetooth - Honeywell Thor VM1 User Manual

Bluetooth

(Start) > Control Panel > Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
To use the Honeywell/Intermec SR61 Bluetooth scanner with the Thor VM1:
•
•
1. Make sure the scanner is on and within range of the Thor VM1.
2. Tap the Discover button on the
3. From the list of discovered devices, tap the SR61 scanner and select Pair as a
Factory Default Settings
Discovered Devices
Settings
Turn off Bluetooth
Computer is connectable
Computer is
discoverable
Prompt if devices
request to pair
Continuous search
Filtered Mode
Printed Port - COM7:
Logging
Computer friendly name
Reconnect
Report when connection
lost
Report when
reconnected
Report failure to connect
Clear Pairing Table on
Boot
Auto Reconnect on Boot
Auto Reconnect
128
The EZPair software must be version 2ab or greater. See the Bluetooth
panel for the version installed. Contact
information.
The EZPair bar code on the Thor VM1 cannot be used to connect the SR61 scanner.
Follow this procedure:
Scanner
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Technical Assistance
Bluetooth Devices
None
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled (unchecked) by default in both Filtered and Non Filtered Modes. The
option is dimmed in Non Filtered Mode.
Disabled
System Computer Description
Enabled
Disabled
Enabled
Disabled
Enabled
Enabled
About
for software upgrade
tab.
control