Honeywell Thor VM1 User Manual page 200

EAP-TLS
To use EAP-TLS, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set EAP Type to EAP-TLS
3. Set Encryption to WPA TKIP
4. Set Auth Type to Open
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for
encryption and complete other entries as detailed in this section.
See
Click the Credentials button.
•
•
Enter these items as directed below.
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Select a user certificate from the Windows certificate store. Use the Browse button to
locate the User Cert from the certificate store. Highlight the desired certificate and
press the Select button. The name of the certificate is displayed in the User Cert box.
190
Sign-On vs. Stored Credentials
No entries except the User Certificate Filename and the CA Certificate Filename are
necessary for Sign-On Credentials as the user will be prompted for the User Name
when connecting to the network.
For Stored Credentials, User Certificate Filename and the CA Certificate Filename
must be entered.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
for information on entering credentials.