Honeywell Thor VM1 User Manual page 198

EAP-FAST
To use EAP-FAST, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set EAP Type to EAP-FAST
3. Set Encryption to WPA TKIP
4. Set Auth Type to Open
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for
encryption and complete other entries as detailed in this section.
The SCU supports EAP-FAST with automatic or manual PAC provisioning. With auto-
matic PAC provisioning, the user credentials, whether entered on the saved credentials
screen or the sign on screen, are sent to the RADIUS server. The RADIUS server must
have auto provisioning enabled to send the PAC provisioning credentials to the Thor
VM1.
For automatic PAC provisioning, once a username/password is authenticated, the PAC
information is stored on the Thor VM1. The same username/password must be used to
authenticate each time. See the note below for more details.
For manual PAC provisioning, the PAC filename and Password must be entered.
See
The entries on the Credentials screen are determined by the type of credentials (stored
or sign on) and the type of PAC provisioning (automatic or manual).
Click on the Credentials button.
To use Stored Credentials, click on the Credentials button. No entries are necessary for
Sign-On Credentials with automatic PAC provisioning as the user will be prompted for
the Username and Password when connecting to the network.
188
Sign-On vs. Stored Credentials
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
for information on entering credentials.