Honeywell Thor VM1 User Manual page 220

Network
The appearance of the network tab depends on the type of firmware selected.
Network with SIM Card
Select Connection
Label
Select automatically
Use GPRS/EDGE only
Use UMTS/HSPA only
Select and tap Apply. A "Network changed successfully" message is displayed.
Close the tab and view the signal strength icon in the main window. Once the signal
strength is displayed, you can establish a connection.
Select Network
Use this option to select from available networks.
Note: When you are registered to a CDMA network, you cannot select the network. "All CDMA
network" is shown instead.
Note: The network list only appears if the connection setting is Only use GPRS or Only use
UMTS/HSPA.
Select the network and tap on the Register button. If the change is successful you will
see the message "Network changed successfully".
This item is useful when traveling . Automatic mode selects the preferred network of
your network operator.
210 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Description
Selects the best suited network automatically
Use only GPRS/EDGE for a connection
Use only UMTS/HSPA for a connection.