Using Oneclick Internet; Menu Buttons - Honeywell Thor VM1 User Manual

Using OneClick Internet

If OneClick Internet is not loaded, double-tap the desktop icon to load it. If OneClick
Internet is loaded but minimized to the system tray, tap the OneClick Internet icon in the
system tray to maximize it.
Connection Management
1. Launch the OneClick Internet Connection Manager and wait until the status icon is
2. If there is a problem, verify the SIM card is installed (AT&T, T-Mobile only), the proper
3. If PIN security is used, a popup window prompts for the SIM PIN.
4. Create a connection profile on the Settings menu.
5. Tap the Connect button.
The signal strength is indicated as well as the name of the mobile network you are using
and the status of the WWAN device. Tap the Disconnect button to end the session.

Menu Buttons

Radio Button
to disable the radio in instances where it is not desired (such as during airplane travel).
206
blue indicating ready.
firmware has been loaded, etc.
The Radio button allows you to switch the WWAN radio on and off to save power or
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide