Crankshaft Front Seal - Remove And Install - Perkins 1106D Disassembly And Assembly

84
Disassembly and Assembly Section
Illustration 153
1. Ensure that the crankshaft adapter and the front
of the crankshaft are clean and free from damage.
Install the crankshaft adapter (1) to the crankshaft.
2. Install the three torx screws (3) to the crankshaft
adapter (1).
3. Use a suitable tool in order to prevent the
crankshaft from rotating. Use Tooling (B) to tighten
the torx screws to a torque of 200 N·m (147 lb ft).
4. Repeat Step 3 two more times in order to ensure
correct torque.
5. Install Tooling (A) to the crankshaft adapter (1).
6. Align the crankshaft pulley (2) with Tooling (A).
Install the crankshaft pulley to the crankshaft
adapter (1).
7. Inspect the vibration damper for damage. If
necessary, replace the vibration damper.
8. Align the vibration damper (3) with Tooling (A).
Install the vibration damper to the crankshaft
adapter (1).
9. Install the setscrews (4) to the assembly of the
crankshaft pulley, the vibration damper and the
crankshaft adapter. Remove Tooling (A). Install
the remaining setscrew (4).
Note: The setscrews should be evenly spaced.
10. Use a suitable tool in order to prevent the
crankshaft from rotating. Tighten the setscrews (4)
to a torque of 115 N·m (85 lb ft).
End By:
a. Install the alternator belt. Refer to Disassembly
and Assembly Manual, "Alternator Belt - Remove
and Install".
Crankshaft Front Seal -
Remove and Install
Removal Procedure
Table 35
Tool
g01167596
A
Start By:
a. Remove the crankshaft pulley. Refer to
Disassembly and Assembly, "Crankshaft Pulley
- Remove and Install".
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
Illustration 154
1. Position Tooling (A) on the nose of the crankshaft.
Screw Tooling (A) into crankshaft front seal (1).
Note: Do not damage the edge of the housing for
the crankshaft front seal.
Required Tools
Part
Part Description
Number
Front Oil Seal Removal
27610301
Tool
NOTICE
SENR9983
i02403280
Qty
1
g01195333