Perkins 1106D Disassembly And Assembly page 43

SENR9983
3. Remove the center four setscrews (2) from the
exhaust manifold (3). Remove the outer eight
setscrews (5) and the spacers (4) from the
exhaust manifold (3).
Note: Support the manifold as the setscrews are
removed.
4. Remove the assembly of the exhaust manifold
(3) and the turbocharger.
5. Remove the two exhaust manifold gaskets (1).
Discard the gaskets.
6. Remove the turbocharger from the exhaust
manifold (3). Refer to Disassembly and Assembly
Manual, "Turbocharger - Remove" Steps 8 through
15.
7. If necessary, remove the four studs (6) from the
exhaust manifold (3).
Installation Procedure (Side
Mounted Exhaust Manifold)
Table 13
Required Tools
Part
Tool
Number
Guide Stud
-
A
(M10 by 100 mm)
-
B Loctite 575
Illustration 79
Part Description Qty
4
-
Disassembly and Assembly Section
43
g01176473