Exhaust Manifold - Remove And Install - Perkins 1106D Disassembly And Assembly

SENR9983
c. If the wire lead (1) is secured with a cable tie,
install a new cable tie.
Exhaust Manifold - Remove
and Install
Removal Procedure (Side Mounted
Exhaust Manifold)
Start By:
a. Remove the turbocharger. Refer to Disassembly
and Assembly Manual, "Turbocharger - Remove".
Illustration 75
Illustration 76
1. Loosen the setscrews (2) and (5) in reverse
numerical order. Refer to Illustration 76.
Note: This will help prevent distortion of the exhaust
manifold.
i02295960
g01174489
2. Remove the center four setscrews (2) from the
exhaust manifold (3). Remove the outer eight
setscrews (5) and the spacers (4) from the
exhaust manifold (3).
Disassembly and Assembly Section
41
g01176473